Sentence examples for mixture which resulted from inspiring English sources

After completion of reaction, ice water was added to the reaction mixture which resulted the precipitation of the product.

The results of DC and WT tests showed that the permanent deformation characteristics were considerably improved by the addition of a 4% Portland cement 3% bitumen emulsion mixture, which resulted in reduction of permanent strain of the mixture.

Mixture was incubated with wheat germ extract in the presence of 2.4 µM [14C] NAD (6×105 cpm) (Amersham Biosciences, UK) for 40 minutes at RT. Reactions were terminated by addition of TCA to the reaction mixture which resulted in total protein precipitation.

Upon depletion, reservoir pressure may fall below the dew-point of the hydrocarbon mixture which results in liquid condensation at reservoir conditions.

On the other hand, excess amount of MK can enhance the shrinkage and viscosity of UHPFRC mixture, which result in that its microstructure development may be disturbed by shrinkage caused micro-cracks and trapped bubbles.

The starting materials were the as-prepared mixture, which results from cracking of heavy oils, and the sample post-treated at 2700 °C in argon atmosphere in order to increase the graphitization degree.

Gap fractions were slightly overestimated by Maestra in the monocultures and underestimated in the mixtures, which resulted in underestimates of APAR of 3.4% for A. mangium monocultures, 4.5% for E. grandis monocultures and overestimates of 4.6% for 1 1 mixtures.

In our supervised work, we had presented two methods, one based on a linear mixture, whose adaptation to the unsupervised case results in the basis pursuit method described here, and another based on multinomial mixtures, which results in the LDA model.

For example the JRC survey reported a large range of mixture exposures which result in some mixture exposures falling in each of the four groups.

1H NMR spectroscopy confirmed the anomeric stereochemistry; the only previously reported synthesis of 4a-e used a Fisher glycosylation which resulted in a mixture of α and β anomers [10].

Annealing of the films for 30 min at 400 °C in an Ar + H2 (10%) mixture markedly increased the carrier concentration, which resulted in the increase in the optical band gap (up to ≈ 3.5 eV) and in the decrease in film resistivity and transparency in the mid-IR spectral range.