Sentence examples for mixture thickness and from inspiring English sources

Nano-scale aluminum was used to increase the overall energy density of the mixture, fumed silica powder was used to increase the mixture thickness and encourage aluminum suspension, and nano-scale titania was also included based on its previous use as a burning rate modifier in solid propellants.

In this paper, particular attention is given to the TiC coatings prepared using an RF sputtering system at low pressure and samples hardness were particularly studied as a function of different parameters (gas mixture, thickness) of the deposition process.

The effect of apex angle and thickness on the backbone curve for the first mode of the functionally garded AL/AL2O3 clamped triangular plate with (β = 60°) and n =1 are presented in Figs. 3, 4. The effects of mixtures, thickness ratio and apex angle are clearly shown on the plot of these figures.

The analysis results suggest that there are interactive effects between the use of RAP-containing mixtures, overlay thickness, and pre-overlay treatment method.

A typical optimization on the major preparation parameters of the coating-type PPy/CNT electrode was conducted, including the mass ratio of electrode material mixture, the coating thickness and the drying temperature.

This means stirring the mixture to a consistent thickness and adding chemicals such as sodium sulfate, sodium chloride or antimony oxide.

However, treatment in an N2 25% H2 mixture gives even greater layer thickness and nitrogen content.

The influences of DCLR/compound DCLR modified asphalt mixture on deflection, upper layer thickness, and bending flexural tensile stress of layer bottom were analyzed using Bisar3.0 and HPDS software.

The effect of mixture reactivity depending on flat layer thickness and its width is studied to evaluate the critical conditions for sonic flame propagation and the possibility for detonation onset.

The rate and depth of rutting depend on the internal factors such as bitumen properties, aggregate, mixture properties and thickness of pavement layers.

Remove the mixture from the heat once it reaches the desired thickness and serve.