Sentence examples for mixture testing from inspiring English sources

The CBA is therefore preferred to the whole mixture testing approach wherever possible [12, 13].

The protectiveness of the CBA approach was thereby assessed in comparison to the whole mixture testing approach.

In comparison to the whole mixture testing approach, the CBA has the strong advantage that it allows assessing the biocidal product and environmental mixtures resulting from its usage with little extra effort, assuming that predicted environmental concentrations are calculated anyway for all relevant product components.

The lower cytotoxicity of the mixture testing was not significantly different from the exposure to TCC alone.

To analyse the effects of CPA, MPA and FPA/cement ratios on the non-structural concrete engineering properties, the range of different pumice aggregate/cement (A/C) ratios of 6 1, 8 1, 10 1, 15:1, 20 1, 25:1 and 30:1 by weight and cement contents of 180, 137, 110, 72, 52, 40 and 32 kg/m3 were used to make PALWC mixture testing samples with a slump of from 2 to 4 cm.

We used this approach to decrease uncertainty in low-dose extrapolation in mixture testing (Feron and Groten 2002).

The latter is the precondition to make sure that the chemical mixture tested in the bioassay resembles the mixture evaluated in chemical analysis.

The free inner volume after putting each sample and sealing an ampoule was in the range 0.7 1.2 cm3 per 1 g of the mixture tested.

The triclopyr/picloram mixture tested provided the best performance but can only be used at this application rate if applied prior to pine planting.

Finally, changing the thickness of the asphalt mixture tested from 63 mm to 200 mm had no significant effect on sound absorption and tire-pavement noise reduction.

Static and dynamic penetration stresses seem to be correlated with rebound and, more precisely, the relation between dynamic measurement and rebound seems independent of the mixture tested.