Sentence examples for mixture specimens from inspiring English sources

Two binders (emulsified asphalt and cement) and six contents were utilized to prepare the mixture specimens.

For this purpose asphalt mixture specimens for both asphalt base and wearing courses were prepared in the laboratory.

The industrial X-ray CT scanning was performed on laboratory prepared open-graded and gap-graded mixture specimens.

The recycled asphalt pavement (RAP) content was set as 25%, and the asphalt mixture specimens were produced in the laboratory.

In terms of percent residual properties, control mixture specimens performed better than filler additive specimens for all heating cycles.

Overall, the predicted dynamic modulus and phase angle from 2D and 3D micromechanical models were compared favorably with lab test data of the asphalt mixture specimens.

CF were related to the specimen compaction approach and compaction effort when molding asphalt mixture specimen.

In order to validate the model, experimental programs are developed for model inputs and outputs, and microstructural simulations of a two-phase mixture specimen are conducted.

The internal structures of asphalt mixture specimen were reappeared, and the transient heat conduction discrete element model was established after the heat flux was applied on the specimen surface.

The experimental setups were conditioned in environmental chambers to maintain a constant test temperature of 20 ± 0.5 °C and specific RH levels to establish the RH differentials between the air above and below the asphalt mixture specimen.

The shape of the voids at the top and bottom of the asphalt mixture specimen is the most complex and irregular, while the shape of air voids in the middle section of the specimen is simple and regular.