Sentence examples for mixture preparation process from inspiring English sources

After carefully calibrating the spray model with the experiment data, a three-dimensional computational fluid dynamics (CFD) simulation was then carried out to study the deposit effect on the air/fuel mixture preparation process in an optical research GDI engine.

Based on the analysis of cycle-to-cycle velocity fluctuations of in-cylinder flow, the impact of various fuel spray boundary conditions on injection processes and mixture preparation is pointed out.

In a typical dGNPs sample, preparation process the reaction mixture was centrifuged at 6,000 rpm for 20 min, and the supernatant was discarded.

To avoid contamination, the PCR process (including master mixture preparation, nucleic acid extraction, reaction installation, and DNA amplifications) were performed in separate dedicated areas.

Aiming at a further simplification of the catalyst preparation process, we calcined a mixture of zirconia hydrosol, rare earth element salt, and nickel salt to obtain a mixture of the tetragonal ZrO2-type triple oxide and NiO.

As the nucleation was triggered by pH changes, the pH of the produced mixture played an important role in the preparation process.

Separate laboratory spaces which were dedicated to the process of DNA extraction, PCR mixture preparation, cycling and electrophoresis were used.

The particle preparation process involves agitation of the particle mixture in a dry ambient atmosphere with an appropriate controlled temperature, which is a simple and low-cost technique compared with the conventional sintering and granulation process used for the preparation of magnetic abrasives.

The detailed preparation process was described as follows: the mixture of zinc nitrate hexahydrate(Zn (NO3 2.6H2O), europium III) nitrate hexahydrate(Eu (NO3 3.6H2O), and 3-Mercaptopropionic acid(MPA) with a molar ratio of Zn2+/Eu/MPA = 1: 0.06: 20 prepared under stirring in N2 atmosphere.

Mixtures of AGEs have been prepared for study after a long, complex, in vitro preparation process, resulting in "AGE-modified" proteins of unknown composition [ 40].

The next step of the preparation process was a heat treatment of the sample in mixture gas of acetylene (99.9%% purity, 30 mL min−1)/argon (420 mL min−1) at different growth temperatures (350, 400, 450, and 500 °C) for 60 min.