Sentence examples similar to mixing phase length from inspiring English sources

After implantation, annealing at 650 °C leads to a mixing phase of anatase with a little rutile in the implanted layer.

The first phase is the mixing phase (up to 1 min), which is the period required to thoroughly homogenize the powder and the liquid.

The growth rate of the industry seems to determine the phases' length.

The ejector performance is very sensitive to the mixing tube length while the entrainment ratio can vary up to 27% by change in the mixing tube length.

The dimensions of the ejector components (nozzle and mixing tube diameters and mixing tube length) could be varied in order to achieve the best performance.

Other parameters like mixing tube length and nozzle diameter have a more complex impact on gas induction.

The optimum mixing tube length of gas liquid ejector is about 1 2 times the mixing tube diameter, and deviation from the optimum value can dramatically degrade its entrainment performance.

Influence of key geometric parameters of gas liquid ejectors like nozzle diameter, mixing tube length, distance between the nozzle outlet and mixing tube, suction chamber geometry and diffuser angle was investigated.

In the absence of swirl elements, the gas suction rate increased slightly with the mixing tube length up to the length-to-diameter ratio equal to six.

Moreover, the mixing tube length has proven to be an important design parameter and can exert a remarkable influence on ejector performance.

In the presence of swirls, however, the mixing tube length exhibited negative effect on the ejector performance and the highest values of gas suction rate and dispersion efficiency were observed for the configurations without the mixing tube.