Sentence examples for mixed powder of from inspiring English sources

Figure 3a, b, c shows representative SEM images of regular pits formed on Si surfaces using the mixed powder of cobalt oxide and graphite as the metal source.

Commercial grade mixed powder of ZnSe and Mn or MnCl2 or manganese acetate (Mn(CH3COO 2) with a weight ratio of 5 1 was used as source material.

The Al2O3-polyimide composite thick films showed a high loss tangent with a large frequency dependence when a mixed powder of 12 vol.% polyimide was used due to the nonuniform microstructure with a rough surface.

Moreover, the Al2O3-polyimide composite thick films had extremely high Al2O3 contents of 95 vol.% and showed a dense microstructure close to that of the Al2O3 thick films when a mixed powder of 4 vol.% polyimide was used.

The Al2O3 content was close to 95 vol.% when the mixed powder of 4 vol.% polyimide is used; however, the microstructure was close to that of the Al2O3 films.

Figure 3d, e, f shows the SEM images of regular pits grown on Ge surface with the mixed powder of copper oxide and graphite as the source for producing copper vapor.

The calcined powders were then weighed, mixed, and oven-dried to produce the mixed powders of (1-x BNKT-x BST (when x = 0, 0.05, 0.1-x BNKT-xand 0.20).

Mixed powders of Ti54.8Ni34.4Nb10.8 (at%) eutectic and Nb metal were used as an interlayer, which will be a liquid phase coexisting with solid particles at the bonding temperature.

Mixed powders of lead and various amounts of alumina were consolidated under static and cyclic pressure at room temperature in constrained "uniaxial" consolidation experiments.

A bioceramic composite coating was fabricated onto AISI 316L stainless steel in situ by laser cladding with mixed powders of CaHPO42H2O and CaCO3 without a bonding agent.

Mixed powders of Ti Zr Cu Ni and TiC were heated to 1223 K and held for 30 min under vacuum.