Sentence examples for mixed electrolyte of from inspiring English sources

PBA was facilely electrosynthesized in the mixed electrolyte of acetonitrile and boron trifluoride diethyl etherate.

In this paper an attempt has been made to machine a semi conducting engineering material with a mixed electrolyte of NaOH and KOH.

The specific capacitance is significantly increased to 635.6 F g−1 in a mixed electrolyte of 0.025 M PD and 2 M KOH.

Ceramic films on AA339.1 cast aluminum alloys (ANSI) were prepared by high-voltage anodization (HVA) in a mixed electrolyte of glutaric acid, sodium tungstate and phosphoric acid.

Electrochemical deposition was carried out under constant voltage, and Pd/Ag/HAp nanoparticles were carefully added in the mixed electrolyte of 1.7 M (NH4 H2PO4 + 0.4 M NH4F, which was slowly rotated by a magnetic stirrer on a hot plate in order to increase the diffusion rate of electrolyte ions.

A thin Ti wire (Sigma-Aldrich; 127-250 μm in diameter, 99.7% purity) was first washed with isopropanol in an ultrasonic bath and subsequently anodized in a mixed electrolyte of C2H5OH (700 ml/l), isopropanol (300 ml/l), AlCl3 (60 g/l), and ZnCl2 (250 g/l) [21].

The properties of oxide layer obtained on aluminium in mixed electrolytes of oxalic acid sulphuric acid are optimized using experimental design.

The properties of anodized films on aluminum using a pulsed current in mixed electrolytes of nitric acid sulfuric acid or boric acid sulfuric acid have been studied.

Cyclic voltammetry (CV) and chronoamperometry have been conducted with the electrochemical quartz crystal microbalance (EQCM) to characterize electron-beam deposited carbon film electrodes in LiClO4-containing mixed electrolytes of ethylene carbonate (EC) and dimethyl carbonate (DMC).

High quality polymer films can be easily produced by low-potential anodic oxidation of fluorene and its alkyl-polymer precursor through 9,9 position (9,9-dibromohexylfluorene, 9- 6-bromohexyl)fluorene, poly(fluorene-9- 6-bromohexylkan-1,6-diyl); Scheme 1) in boron trifluoride diethyl etherate (BFEE) or mixed electrolytes of BFEE + CHCl3.

X-ray photoelectron spectroscopy (XPS) was employed to understand the influences of different mixed electrolytes on the composition of SEI layers.