Sentence examples for mitigation performance of from inspiring English sources

The mitigation performance of three vegetated ditches (VD) and five vegetated detention ponds (DP) was assessed.

Structural impact mitigation performance of the pier equipped with the proposed optimal TMD system was compared with four different TMD systems employing the benchmark TMD optimal parameters.

The main novelty is the investigation of multipath mitigation performance of practically realizable antenna array-based GNSS receivers when the beamforming process is completely integrated into the tracking module after de-spreading.

To computationally investigate the mitigation performance of the devices subjected to a wide variety of ground motions, a numerical model was developed for the structure-NES system and two suites of earthquake ground motions representing distinct earthquake intensities were employed.

To quantify the enhanced shock mitigation performance of the asymmetric VI NES we employ measures of effective damping and stiffness developed in previous works to demonstrate that the primary structure with attached NES possesses drastically increased effective damping and stiffness compared to its nominal properties when no NES is attached.

According to the impact test and neutral salt spray test results, the corrosion mitigation performance, microstructure and chemical composition of the pre-treatment layer could all affect the overall performance of the paint system.

The paper concludes with an evaluation of noise mitigation performance achieved together with a suggested alternative strategy for addressing the noise problem from a system-wide perspective.

A solution is to use semi-active devices, which have shown to be capable of substantially enhanced mitigation performance.

However, as the target angle approaches that of the jammer, mitigation performance is increasingly hampered and distortions are introduced into the resulting beam pattern.

With the beamforming applied, Figure 11 shows the modified map formed by the KA method with 6 training samples, in which we can have an overview of the clutter mitigation performance.

An optimum frequency of 5 Hz exhibits superior fouling mitigation performance while achieving a low time-averaged pressure drop.