Sentence examples for minute per image from inspiring English sources

The total preinjection LFOVPGC imaging time was 3 minutes (1 minute per image).

The total postinjection LFOVPGC imaging time was 2 minutes (one minute per image).

Unfortunately, its applicability is limited by the relatively low image acquisition speed, typically seconds to minutes per image.

This manual technique required about 5 7 minutes per image, the bulk of which was used for the image repair (i.e. particle removal and correcting poorly thresholded regions).

In this study, calculation of D2 starting from the raw images was at least 24x faster than the semi-automated Lm measurements, as D2 required approximately 5 seconds per image and Lm required 2 3 minutes per image.

In addition, we found that the time required for experts to classify the cells was about five minutes per image and, thus, ten times longer as compared to the automated image analysis.

Total processing time was ≈ 10 minutes per image.

JPG photos may be uploaded to Facebook, emailed, printed at your local pharmacy, etc. Note: Removing backgrounds from images takes anywhere from five minutes to about half an hour per image depending upon how well the image contrasts with the background and how much detail there is in the image.

For the 55 presentations with images, lectures with cases per minute, images per minute or images per case one SD above the mean were compared to the remaining talks.

The average time needed to transfer the images is 10 images per minute or one image every 6 s over a home internet connection with upstream network transfer speed of approximately 0.48 Mbps.

OMZ: oxygen minimum zone; DHAB: deep hypersaline anoxic basin; CMFDA: 5-chloromethylfluorescein diacetate (Cell-TrackerTM Green); DPM: disintegration per minute; TIFF: tagged image file format; FT-IR: Fourier transformed infra-red.