Sentence examples for minimum volume fraction from inspiring English sources

The volume fractions V a and V b, which have values that range from 0 to 1, denote the maximum and minimum volume fraction of CNTs.

By fitting the model with the results of static release experiments, the damping coefficients were found to have a good linear relationship with the minimum volume fraction of hydrogel (coefficient of correlation R = 0.9680).

Calculated minimum volume fraction of nanotubes required for the simulated composite to become electrically conductive, known as the percolation threshold [15], was found to be around 1 %, which is lower than the experimentally observed threshold.

The FRC specimens with combined steel and polypropylene fibers of minimum volume fraction of 0.5% in the concrete reached the same shear strength as RC specimen in the absence of shear stirrups.

Of the alloys tested, the minimum in the root mean square (rms) surface roughness and correlation length occurs at the Al 32 at.% Mo composition, which corresponds to the maximum volume fraction of the amorphous phase and the minimum volume fraction of the body centered cubic nanocrystallites.

ACI Subcommittee 318-F recommended the use of a minimum fiber volume fraction (V f ) of 0.75% for replacing minimum shear reinforcement through the use of steel fibers (Parra-Montesinos 2006).

The minimum nitrogen volume fraction in the fuel stream needed to ensure suppression for all strain rates in microgravity was measured to be 0.855±0.016, associated with the turning point, which occurred at a global strain rate of 15 s−15

These experiments provide information on the minimum crystal volume fractions (0.20<φ<0.35) required to maintain the structual integrity of the cube.

The effect of some essential parameters, namely, particle wall restitution coefficient (ew), specularity coefficient, and minimum frictional solid volume fraction (αs,min), was examined.

Nevertheless, in a prestressed concrete beam, the beneficial effect from prestressing forces could further relax the minimum required fiber volume fraction.

Local porosity variations are investigated through a sensitivity analysis on the minimum and maximum solid volume fraction values.