Sentence examples for minimum resistance of from inspiring English sources

All of the solutions were prepared by using ultrapure water with minimum resistance of 18 MΩ cm−2 from Milli-Q system.

The multilayer film yielded a minimum resistance of 1.0 × 104 Ω/sq (2.8 S/cm) for a film with approximately 50 bilayers.

The structure will need to be checked for all groups of limit states to ensure sufficient safety margins between the maximum likely loads and minimum resistance of the structure.

The structure will need to be checked for all groups of limit states to ensure that there are sufficient safety margins between the maximum likely loads and the minimum resistance of the structure.

The results show that when the DSSC fabricated by the TiO2 NP thin film compressed at pressure of 279 kg/cm2, the minimum resistance of 9.38 Ω at dye/TiO2 NP/electrolyte interfaces, the maximum short-circuit photocurrent density of 15.11 mA/cm2, and the photoelectric conversion efficiency of 5.94% were observed.

To minimize the involvement of the shoulder internal rotators, the minimum resistance setting of 0.5 kg was used for the internal rotation direction from an externally rotated position back to neutral [ 26].

The intrusion of water into air conduits used for pressurization and breathing would flow with minimum resistance in the direction of pressure differential.

However, the minimum resistance factor occurs if the twist ratio is in the range of 4.75 5.75.

The output current drive is designed for minimum load resistance of 150Ω.

Minimum support resistance of 0.3 MPa is essential to effectively confine the deformation of a retained roadway.

And the minimum thermal resistance of 0.07 °C/W is achieved at the heat load of 20 170 W for boiling pool.