Sentence examples for minimum residual stress from inspiring English sources

Meanwhile, during down milling minimum residual stress and cutting force can be achieved with flood cutting.

The results are used to identify the minimum residual stress profile for mitigating fretting fatigue in engine disks.

These formulations are exemplified in the optimization of the side heaters in the transient thermal tensioning welding process for minimum residual stress.

Results show that minimum residual stress and cutting force can be achieved during up milling, by adopting the MQL-SiO2 nanolubrication system.

This work illustrates that the fabrication yield and the residual stresses (in the final nanoporous beams) correlate with the permanent buckling deflection of the alloy due to annealing, with the maximum yield (>95%) and the minimum residual stress (∼4 7 MPa) occurring for annealing at ∼300 °C.

The minimum residual stress was 11.4 MPa, found in Ti1−xAlxN films deposited with a nitrogen flow rate of 8 ml/min and a bias voltage of −50 V. Residual stresses of Cu films decreased with the increase of surface roughness of the Ti1−xAlxN films.

This was followed by the geometrical optimization of the cast part for minimum residual stresses.

Cathodic arc deposition of ceramic coatings is gaining importance due to their good adhesion and minimum residual stresses.

The test program was developed to assess the effects of minimum stress, stress range, and residual stress on the fatigue behavior of the longitudinal fillet weld detail, transverse groove weld detail, and a simulated bulkhead attachment detail.

The residual stress presented minimum values for the temperature variation range from 300 °C to 500 °C, while the film hardness monotonously increased with substrate temperature.

The residual stress reaches a minimum value after the coating was heated for 9 h at 600 °C, then increases with the heating duration after 9 h.