Sentence examples for minimum reinforcement model from inspiring English sources

The second series was used to check the accuracy of the modification suggested into minimum reinforcement model.

This paper suggests some modifications to the currently used ACI model for computing flexural strength, service load deflection, and the minimum reinforcement needed to avoid rupturing of the tensile reinforcement.

The details of these models were identical to those of the IMF specimen (N1), which had a transverse beam; however, there were differences in the beam heights and modifying longitudinal reinforcement for satisfying minimum reinforcement percentages in the ACI code.

Most agencies require minimum reinforcement length equal to 70percentt of wall height.

Analytical formulation was presented for minimum reinforcement ratio and verified with experimental results.

Effect of different parameters on the required minimum reinforcement length and the governing design criteria were investigated for these four reinforcement types.

As a result, an analogy can be drawn between the evaluation of the minimum amount of fibers and the computation of the minimum reinforcement ratio in concrete beams.

The minimum reinforcement length criteria vary throughout the world; however most specifications and guidelines require that minimum length should be equal to 70% of wall height.

This study was performed to investigate governing failure mode in determining the required minimum reinforcement length and also to investigate the possibility of shortening the specified minimum reinforcement lengths.

The design of slab top and bottom reinforcement at the middle strips is governed by the code minimum reinforcement requirements to control cracking due to shrinkage and normal temperature changes.

Following the reinforcement model an error is understood as a negative reinforcement signal processed within the mesencephalic dopaminergic system.