Sentence examples for minimum reflection from inspiring English sources

The obtained porous thin films exhibited excellent anti-reflective (AR) performance over visible range with minimum reflection of 0.02%.

The minimum reflection loss for the absorber with thickness of 2.1 mm can reach −38.8 dB.

This AR thin film showed the maximum transmittance (99%) and the minimum reflection (0.04%) around 550 nm in wavelength.

However, for composition Fe70Si30, the minimum reflection loss shifts to lower frequency and larger value with the thickness increasing.

With 60 wt% addition amount and 1.5 mm coating thickness, the minimum reflection loss of Zn ferrite/MWCNTs composite was −42.6 dB at 12.1 GHz.

The minimum reflection loss (RL) was observed for PVB-NiO-FAC composite in a large band width as compared to PVB-CoOx-FAC and PVB-FAC composites.

A minimum reflection loss value of −48.0 dB was achieved for this ZnO@Fe at the layer thickness of 1.5 mm.

The minimum reflection loss and the frequency bandwidth below −20 dB for BCN are −56.2 dB and 7.7 GHz respectively, indicating better microwave absorption properties.

A minimum reflection loss of −16.5 dB is obtained at 13.9 GHz for composition Fe70Si30 with the thickness of 1.5 mm.

A minimum reflection loss of −6.9 dB is obtained at 2.7 GHz for composite Nd3Fe66Mn2Co18B11 with absorber thickness of 1.5 mm.

The minimum reflection coefficient (RCmin) of this nanocrystal-containing ceramic reaches −46 dB, exhibiting a promising prospect as a kind of electromagnetic wave (EMW) absorbing materials.