Sentence examples for minimum pore size from inspiring English sources

Minimum pore size for barrier-free transport (dmin) and the minimum pore size for Knudsen diffusion (dK) are calculated for each gas and a mechanism for the intermediate region is suggested in which the attractive van der Waals forces cause an accelerated entrance velocity of the gas at the pore opening.

Furthermore, the latter result showed a minimum pore size variation (of approximately 450 nm) in the reduction of the main width of the macropores (from 1.2 μm to 750 nm) formed along the LEF direction.

However, it is worth noting that these simulation experiments are performed based on the pore geometric characteristics of a convention formation that has a minimum pore size on the micrometre scale.

The present model considers the wettability and pore size related liquid slip effect, total organic carbon (TOC) content, and the structural parameters (maximum and minimum pore size of inorganic or inorganic matter, porosity) of shale matrix.

This study investigates the correlation between air and water permeability and water infiltration rate in concrete with the minimum pore size through which a mass has to pass for penetration to be possible.

The analysis of the SEM images of the chitosan cores showed that the average pore size and mean minimum pore size only slightly differ when the cooling rate is varied from B = 1 5 K/min and the temperature gradient from G = 1, 1.5, 2.0 K/mm.

The architecture and pore shape in the metallic biomaterial scaffolds were relatively precise reproduced and the minimum mean pore size was 231μm.

By matching to the experimentally measured fatigue weak-links, the minimum critical pore size for fatigue crack initiation was determined to be 11 μm in diameter at the cyclic maximum stress of 100% yield strength of the alloy.

Both capillary pressure and hydraulic resistance are expressed in terms of microscopic variables such as minimum and maximum pore sizes and fractal dimensions.

The minimum and maximum pore sizes were measured.

Based on early studies, the minimum requirement for pore size is considered to be ∼100 μm due to cell size, migration requirements and transport.