Sentence examples for minimum oxygen concentration from inspiring English sources

The minimum oxygen concentration in the scaffold and its location under different conditions were summarized.

The second one includes underventilated fires for oxygen concentration ranging between the Minimum Oxygen Concentration of the given fuel and around 7% (this value corresponds to the Minimum Oxygen Concentration of carbon monoxide).

The water vapour dilution effects on the explosion limits, maximum explosion pressure, vapour deflagration index and minimum oxygen concentration were explored; a triangular flammability diagram was also established.

Although suppressing oxygen partial pressure was found to increase ethylene selectivity, a minimum oxygen concentration is required in order to maintain the catalyst in oxidized state.

The oxygen concentration distribution, minimum oxygen concentration within the scaffold and its corresponding location, as well as the Sherwood number are presented at different Darcy numbers, Reynolds numbers and Damkohler numbers.

The minimum oxygen concentration reached at the center of multiple spheroids with diameter of 200 μm is significantly higher than the one of the perivenous zone in vivo, while for larger microtissues (400 μm diameter) the oxygen concentration drops to values that are equal to the maximum concentration found in the liver periportal zone.

These figures show how the critical lumen length, Lcrit say, required to satisfy the minimum oxygen concentrations of Table I varies as a function of the lumen velocity U.

The explosion parameters investigated are: maximum explosion pressure (Pmax), maximum rate of pressure-rise (dP/dt)max, dust explosibility index (KSt), minimum explosible concentration (MEC), minimum ignition energy (MIE), minimum ignition temperature (MIT), limiting oxygen concentration (LOC) and effect of reduced oxygen level on explosion severity.

This leads to consistency in the limiting oxygen concentration (LOC) and minimum required amount of inert gas (MAI) values.

A measurement of centerline oxygen concentrations shows that the oxygen concentration reaches a minimum value at a flame height of 50 mm in the CAP flame but decreases more gradually in the CoA flame.

For HFB operation it is necessary to specify the inlet flowrate and fiber length to maintain the oxygen concentration above this minimum.