Sentence examples for minimum load ratio from inspiring English sources

Minimum load ratio and lifetime hours of diesel generator are taken as 25% of 15000 respectively for modelling.

With constant load amplitude, the experiments were conducted with three load ratios (minimum load over maximum load in a loading cycle): 0.1, 0.5 and 0.75.

Corrosion fatigue crack growth (CFCG) experiments of AISI 4340 high strength steel were conducted using pre-cracked compact tension specimens in dry air, distilled water, and 3.5% NaCl aqueous solution at different R-ratios (where R is the ratio of the minimum load over the maximum load in a loading cycle) and different loading frequencies.

The influences of the R-ratio (the ratio of the minimum load to the maximum applied load in a cycle), notch size, the tensile and compressive overloads, and the loading sequence on crack growth were studied.

It is free to order with a minimum load of €30.

The load ratio R (load minimum/load maximum) is one of the commonly considered parameters and, although many attempts have been made with the aim to identify the different mechanisms that depend on R (e.g. crack closure effects), this parameter is still used as an additional input in many applications.

Minimum load of the gas turbine and minimum boiler load for the steam power plant is set to 40%% of nominal load.

a Traffic load ratio is 25 with 10 flows.

b Traffic load ratio is 10 with 4 flows.

Specifically, threshold behavior is examined for large through-thickness cracks >4 mm in length), short through-thickness cracks (~200 μm in length), and microstructurally-small surface cracks (10 50 μm in diameter) under combined mode I and mode II loading at load ratios (ratio of minimum to maximum load) ranging from 0.1 to 0.8.

During fatigue loading (constant amplitude), specimen deflections were measured at maximum and minimum loads.