Sentence examples for minimum laser power from inspiring English sources

Equation 5 shows that the minimum carrier power ultimately sets the minimum laser power in the heterodyning operation.

Optimal parameters were defined as the minimum average laser power and beam dwell time required for surgical-ablation.

Optimal laser parameters for surgical-ablation were defined as both the minimum average laser power and beam dwell time that visually produced ablated blastomeres.

Detachment is observed only if the laser power is greater than this minimum, and we reason that this results from laser heating in the immediate vicinity of the bead-silicon nanomembrane attachment site, weakening the coupling moiety, but we cannot at this stage determine where the break occurs.

For minimum damage to the perivenous tissue we recommend a laser power of 15 W and a pullback speed of 2 mm/s.

In the link analysis below, the laser power is calculated based on the minimum current required by the next stage the link is connected to, while compensating all the insertion losses from both devices and waveguide sections.

Laser power was as minimal as possible for each measurement.

Although the higher laser power induced the larger tensile residual stresses, the minimum iron loss was obtained at the medium tensile residual stress conditions of about 100 200 MPa.

The appropriate writing speed and laser power for reasonable feature quality depends on the minimum bands of the designed structures.

The minimum detectable limit of about 10 parts-per-million volume (SNR=1) is achieved with an average laser power of 3.5 mW at atmospheric pressure, and an integration time constant of 3 ms; thus, the minimum detectable absorption coefficient normalised by power and bandwidth is 4.0×10−8 W cm−1/√Hz.

When the CO2 laser beam was focused with a 1-m radius of curvature mirror, it produced a minimum beam radius or a beam waist of 1.2 mm, and at a laser power of 50 W on the 10.6-μm emission line, a power density of 2.2 kwasm2 wachievedved.