Sentence examples for minimum kerf width from inspiring English sources

The parameters were optimised for minimum kerf width and HAZ formation.

Minimum kerf width values resulted under wire tensions ranging between 3.5 4.0 N while the servo voltages ranged between 65 75 V.   6.

Minimum kerf width values resulted under wire tensions ranging between 3.5 4.0 N while the servo voltages ranged between 65 75 V.

Thus, it can be concluded that when wire tension values ranges between 3.5 N and 4.0 N in addition with servo voltage ranges between 65 V and 75 V, minimum kerf width values resulted.

However, the minimum kerf width of value less than 66 μm is located at the region of color dark blue when the wire tension has values ranges between 3.5 N and 4.0 N with servo voltage values ranges between 65 V and 75 V.

whereas, the minimum kerf width of value less than 66 μm is located at the region of color dark blue when the wire running speed has values ranges between 10.5 m/min and 11.5 m/min with dielectric flow rate values ranges between 1.5 L/min and 2.5 L/min.

For minimal kerf widths, the WEDM process is preferred to operate under wire running speeds between 10.5 11.5 m/min in addition to dielectric flow rates ranging between 1.5 2.5 L/min.  .

For minimal kerf widths, the WEDM process is preferred to operate under wire running speeds between 10.5 11.5 m/min in addition to dielectric flow rates ranging between 1.5 2.5 L/min.

The key processing parameters were determined and optimized for small kerf width and minimal Ra of the kerf sidewall while retaining high production efficiency.

The kerf quality characteristics considered are kerf width, kerf taper and kerf deviation, and measured through Tool Makers Microscope.

Surface roughness and Kerf width follow the LB criterion.