Sentence examples for minimum integration time from inspiring English sources

The minimum integration time per pixel is 4 μs while optical and electrical crosstalk are negligible without the need for any post-processing or other non-standard techniques.

A minimum integration time of 2 s is required in order to obtain high quality.

Figure 7 shows that the minimum requirements of ISO/DIS 10893-7 can be reached with a minimum integration time of 4 s (W18, diameter 63  m), 2 s (W17, diameter 80  m) and 1 s (W15, diameter 130  m) for the wall thickness of 4,9 mm to 9,7 mm [10].

Drosophila LMCs cannot adapt faster than their minimum integration time (5 to 50 ms), which depends on the mean luminance (Fig. 2A) and ambient temperature (cf. Fig. S2); see also [36].

The spectrometer was based around a transmissive grating (1200 L/mm, Wasatch Photonics, Logan, UT) and a CCD linescan camera (Aviiva, SM2CL1014, EV2 Technologies, Essex, England) capable of lines rates of up to 59 KHz with a minimum integration time of 5 µs.

Five factors were considered, the five impedance spectroscopy measurement parameters: maximum integration time; minimum number of integration cycles; number of stabilization cycles; maximum stabilization time; and minimum cycle fraction.

The system has been implemented on a small-size and low-cost Commercial-Off-The-Shelf (COTS) FPGA/DSP-based board, and features 64 input channels, a maximum counting rate of 45 MHz, and a minimum integration window (time resolution) of 24 μs with a 23 b counting depth.

The minimum time indicated was the specific integration time that fulfilled the defects visibilities compared with film.

A counting threshold strategy is adopted to further optimize the measurement performance, where a low limit is set to the counted photon number so that the 4-channel parallel TCSPC process continues until the low limit is reached in the channel with the minimum photon-counting-rate or the integration time spent.

The spatial coefficient of variation (CV) of the scalar fluxes decreased with increasing integration time, stabilizing at a minimum that was independent of further lengthening the averaging period (hereafter a 'stable minimum').

It is suited for a long integration time, room-temperature operation and minimum power dissipation.