Sentence examples for minimum insertion loss from inspiring English sources

The minimum insertion loss including the transmission loss and coupling loss is about 10.7 dB.

The position and length of the linkage that give optimum Q and minimum insertion loss are determined.

A minimum insertion loss of −1.22 dB and return loss of better than −9.3 dB have been measured over the entire passband.

When the device acts as an optical add multiplexer, the minimum insertion loss is 0.944 dB and all of the extinction ratios are bigger than 25 dB.

The mode launcher diameter and length are optimized considering the minimum return loss and the minimum insertion loss by using CST microwave studio.

When the device acts as an optical drop multiplexer, the minimum insertion loss is 4.481 dB and the maximum extinction ratio is 31.931 dB.

The designed six electro-optical logic gates with the operation speed of 10 Gbit/s have a minimum extinction ratio of 35.6 dB and a maximum insertion loss of 0.21 dB for transverse electric modes at 1.55 μm.

Measurements illustrated a minimum 2.75 dB insertion loss at 5.5 GHz in the band pass, and more than 40 dB attenuation, at 8 GHz.

Switched capacitors fabricated on 500 µm thick quartz substrates, result in 30° phase shift (0.66 mm × 1 mm in dimension) with associated minimum −0.18 dB insertion loss and better than −21 dB reflection coefficient at 22 GHz frequency.

The proposed UWB filter provides 108% measured 3 dB fractional bandwidth (FBW) & insertion loss 1.6 2.1 dB in the passband (2.6 10 GHz) with a minimum flat group delay of 0.2 ns.

It has low insertion loss and crosstalk.