Sentence examples for minimum ignition temperature from inspiring English sources
It showed notably that, as the particle size decreases, minimum ignition temperature and minimum ignition energy decrease, indicating higher potential inflammation.
The measured parameters include maximum deflagration pressure rise, maximum rate of pressure rise, minimum ignition temperature, minimum ignition energy and minimum explosible concentration.
The MIT (minimum ignition temperature) and MIE (minimum ignition energy) are two important properties for designing safety standards and understanding the ignition process of combustible mixtures.
The Minimum Ignition Temperature of Decomposition of tetrafluoroethylene was observed to decrease with the initial pressure, in agreement with previous experiments with small scale cylindrical vessels.
Finally, simplified methods for predicting the Minimum Ignition Temperature of Decomposition of tetrafluoroethylene presented previously by the authors are validated for large scale reactors with the experimental data collected within the current work.
Experimentation was conducted by following standardized test procedures and using standardized apparatus for determination of maximum explosion pressure, size-normalized maximum rate of pressure rise, minimum explosible concentration, minimum ignition energy, and minimum ignition temperature.
We reveal the minimum ignition temperatures of slurry droplets in air flow.
Both ignition sensitivity characteristics (minimum ignition energy and minimum ignition temperatures) and explosion severity characteristics (maximum explosion pressure, Pmax, and maximum rate of pressure rise, Kst) are investigated.
Furthermore, an experimental setup, similar to the standard ASTM E 2021 test, is used to determine the minimum ignition temperatures of coal layers of various thicknesses and to assess the ignition scenario in the wedge configuration using an effective length scale.
A minimum in ignition temperature with composition occurred at about a 15% methane in oxygen feed (φ = 0.3) and was not affected strongly by pressure, preheat, or residence time.
The temperatures of combustion of bitumen were lower than the minimum acceptable ignition temperature.
