Sentence examples for minimum deviation of from inspiring English sources

Light emerging from raindrops after one internal reflection has a minimum deviation of about 138° and thus the greatest intensity in the directions forming a cone with an angular radius of about 42°, with arcs (from inside to outside) of violet, indigo, blue, green, yellow, orange, and red.

The goal of the procedure is to search for an optimal fuel utilization, looking for a lattice with minimum average enrichment, with minimum deviation of reactivity targets and with a local power peaking factor (PPF) lower than a limit value.

The calculation results show that the minimum deviation of mass flux among water wall presents at connection style 1, in which outer-front wall, outer-left (right) wall, inner-front wall, and inner-left (right) wall are connected to the same steam-water separator.

The optimal process parameter settings are found as lamp current of 19 A, pulse frequency of 3.2 kHz, pulse width of 6% duty cycle, cutting speed as 22 rpm and assist air pressure of 0.13 N/mm2 for achieving the predicted minimum deviation of upper width of −0.0101 mm, lower width 0.0098 mm and depth −0.0069 mm of laser turned micro-grooves.

We set the minimum deviation of normalized trust vector as (|T_V|_{text {min}}^).

Verification and comparison of results obtained from such integrated models with actual and blind wells provided high accuracy and reliability score with minimum deviation of results.

(C) V-shape data peak represents change of the distance to the single CCR panel due to the spin of the satellite; the minimum deviation MD of the panel is indicated.

It is shown that the developed methodology effectively finds the minimum deviation zone of the surfaces using a small number of sample points.

This paper discusses the optimum kinematic synthesis of the centric RPRR mechanisms for prescribed limit positions, while simultaneously satisfying either (i) minimum deviation from 90° of its transmission angle, (ii) maximum mechanical advantage, or (iii) linear correlation between the input- and output-link motions.

R326H and R356Q mutant structures showed the minimum deviation till the end of the simulation, resulting in the backbone RMSD of ~0.37 to ~0.51 nm and ~0.38 to ~0.54 nm, respectively.

The minimum average and minimum standard deviation of test statistics are selected for the criteria choosing the best fit at all depths.