Sentence examples for minimum coating thickness from inspiring English sources

At present, a minimum coating thickness of 40 μm is required to determine the coating thickness.

The fraction of scanned vaginal surface with coating thickness > 50 μm was also calculated since this is a putative threshold of minimum coating thickness needed for a microbicide gel at any position over the vaginal epithelium.

The minimum TiN top coating thickness and coating architecture were optimized for good corrosion and oxidation resistance.

The maximum and the minimum values of the coating thickness were determined to be 98 μm and 32 μm, respectively.

A minimum value of dimensionless coating thickness, which is required to protect the substrate from yielding, is proposed.

With 60 wt% addition amount and 1.5 mm coating thickness, the minimum reflection loss of Zn ferrite/MWCNTs composite was −42.6 dB at 12.1 GHz.

The normal stress on the coated surface decreases with coating thickness, up to approximately 1 mm for which the value of stress is the minimum.

The results of the modelling have been validated against closed-form analytical solutions (where available) and are summarised in the form of a design curve showing the optimum combinations of coating thickness and coating modulus for minimum sensor obtrusivity in such laminates.

Physical properties include elastic modulus, coating thickness, and Baier's "bioadhesive minimum" or "theta surface" (critical surface tension, a property of surface energy, between 20 27 mN m−1)[2] [6], while chemical properties may include catalysts (e.g. organotins, organobismuths, etc)., silicone oils, and free silicone components that migrate to the surface of the polymer [7] [9].

The wettability of the coated VACNTs depended on both the coating thickness and the pH conditions.

However, the property of a coated cathode was highly dependent upon the coating material, coating thickness, and coating shape [12 15].