Sentence examples for minimum bending radius from inspiring English sources

The minimum bending radius for the inner layer of double and triple MoS2 was about 3.0 nm and 3.1 nm, respectively.

Prediction of springback and minimum bending radius without failure are the main issues in die design for straight flanging process.

The minimum bending radius calculated according to the method established is in agreement with data reported in the literature.

The mirror's minimum bending radius and bending resolving power are 1002 m and 24.2 m, respectively, and its suppression ability for surface error is better than 0.78 μrad.

Smaller curvature radius comparing to minimum bending radius of the tube of rectangular cross-section can be acquired successfully when the being bending angle is given.

Flexible QLEDs have been commonly manufactured based on ITO electrodes patterned on a flexible PET substrate, whose thickness was in the range of hundreds of micrometers.148 Owing to the thick substrate and the fragile ITO electrode, the minimum bending radius of the display was limited to several tens of millimeters.

The sizing of the cutouts that are required for multiple folds is based on minimum bend radius of the material.

Compared with conventional parallel straight waveguide coupler (SWC), this structure has more flexibility with two variable parameters of bending radius R and minimum edge-to-edge spacing d0, which are the two main parameters for the splitting ratio of coupler and decrease the complexity of device design and fabrication.

With the bending radius of the glass capillary increasing, the SERS performance turns better (Fig. 5c).

The bending radius of the dipole magnet will be 1850 mm and the bending angle 50°.

The non-uniform curvature of bending die cavity can be defined by the required bending radius and bending tube material.