Sentence examples for minimum bend radius from inspiring English sources

The sizing of the cutouts that are required for multiple folds is based on minimum bend radius of the material.

The minimum bending radius for the inner layer of double and triple MoS2 was about 3.0 nm and 3.1 nm, respectively.

Prediction of springback and minimum bending radius without failure are the main issues in die design for straight flanging process.

The minimum bending radius calculated according to the method established is in agreement with data reported in the literature.

Smaller curvature radius comparing to minimum bending radius of the tube of rectangular cross-section can be acquired successfully when the being bending angle is given.

The mirror's minimum bending radius and bending resolving power are 1002 m and 24.2 m, respectively, and its suppression ability for surface error is better than 0.78 μrad.

In this paper, a wrinkling wave function is proposed and a simplified wrinkling prediction model to predict the minimum bending radius for tubes is established based on thin-shell theory, forming theory, the energy principle and wave function.

Flexible QLEDs have been commonly manufactured based on ITO electrodes patterned on a flexible PET substrate, whose thickness was in the range of hundreds of micrometers.148 Owing to the thick substrate and the fragile ITO electrode, the minimum bending radius of the display was limited to several tens of millimeters.

The inset picture shows the cyclic bending machine and the minimum bending radius is 5 mm.

We bundled 127 hollow optical fibers whose transmission characteristics are representatively shown in Fig. 2. The inner diameter of each fiber was 320 μm, and the length and total diameter of the bundled fiber were 470 mm and 6 mm. Figure 3 shows the flexibility of the bundled fiber; the minimum bending radius was around 35 mm.

The minimum allowable bend radii of RTPs with different ply angles are determined.