There are azimuth or dual-axis tracking systems that adjust panel orientation and follow the Sun in the sky while minimizing the angle of incidence, θ, and maximizing beam insolation.
The actin filament and myosin cofilaments interacted on a glass surface to minimize the angle between them, and to minimize the interaction between myosin and the glass surface.
To minimize the angle-corrected bias, we used transcranial color-coded sonography (TCCS) (iU22; Philips, New York, NY, USA), instead of transcranial Doppler (TCD), to evaluate the blood flow velocity in middle cerebral artery (MCA).
The response surface algorithm was used to optimize the design parameter for maximizing the bendability and minimizing the springback angle.
The channel surface was selectively modified to form microstructures that enhanced the non-wetting behavior while minimizing the contact angle hysteresis (CAH) of the LM droplet on the surface.
In the initial random distribution of all words, before minimizing the energy function, the angles between word vectors in multi-dimensional space tend to be close to 90°.
Moreover, the presentation of the fuzzy balancing controller is not considerably affected by changes in the environmental parameters, which demonstrates the effectiveness of the fuzzy controller in minimizing the seesaw tilt angle in the time domain, although the system is caused by unpredicted loading variation.
The DOA has been estimated as the angle minimizing the sum of the MUSIC pseudo-spectra, for θ= 0 ° … 360 ° for every 2 °, using all 8 microphones of the circular microphone array for the frequency range from 50 Hz to 5 kHz, cf. Section 3.3.
To minimize these, one must tilt the parabolic mirrors toward opposite sides of the parallel schlieren beam and also minimize the tilt angles of the mirrors by choosing mirrors with long focal lengths, preferable at least f/8 if not f/10.
When U0 ≤ 0.5, the angle for minimizing interflow between wells should be β = 0; when 0.5 < U0 < 0.7854, the angle for minimizing the interflow should be β = arccos 0.5U0); when U0 > 0.7854, the injection well should be placed downstream from the production well.
