To ensure short residence times are achievable, a high efficiency/fast separator is designed to provide a sharp separation between the hot regenerated catalyst and hydrocarbon vapors, thereby minimizing dry and coke yields.
The results demonstrated the advantage of the down flow technology to suppress back-mixing and reduce thermal cracking reactions, thereby increasing the yield of light olefins (ethylene, propylene and butylenes) while minimizing dry gas and coke yields despite the high operating temperatures [3].
The Green Office practices designed to minimize dry waste and provide situational and systemic changes for behavior, such as Sustainable Meeting, Saving Paper and Practicing Recycling, resulted in campus paper reduction rates of 30% (2011), 42% (2012) and 58% (2013).
Optimum combinations of these factors were used to minimize dry film thickness variation to 7.5 μm and to 2.5 μm for formulations with viscosity 90 mPa·s and 220 mPa·s, respectively, and for both formulations the coatings obtained were acceptable with respect to length and width.
In addition to a simple closed-loop control algorithm, an adaptive controller was developed that uses a finite element model to simulate filling characteristics in real time and configure the segmented injection line to minimize dry, unfilled regions within the mold.
TEPCO's plan is to minimize dry cask storage as much as possible and to rely indefinitely on vulnerable pool storage.
Instead, look for mouthwashes that contain xylitol, which is a sweetener and is often added to products to help minimize dry mouth.
Future processes can be improved through avoiding dilution and minimize drying, while ingredient production should focus on functionality rather than purity.
Ceramic colloidal processing methods require stable, well-dispersed suspensions with extremely high levels of solids loading to achieve optimal casting condition and green body properties and also to minimize drying induced shrinkage [9 11].
For release of the in vivo strain, the ESs were excised (undercut) from the fruit using a razor blade and left on the fruit in situ to relax for 1 h to minimize drying.
Studies have shown that compared with LASIK, SMILE minimizes dry eye, while maintaining higher corneal sensitivity [ 8, 9] and cornea tensile strength [ 10, 11] after surgery.
