Sentence examples for minimize voltage from inspiring English sources

Dynamic reactive power compensation; Fast power control; FACT devices to provide reactive power and minimize voltage dip; Wind turbine protection and control; Fast response energy storage system.

Meanwhile, a control strategy for the multilevel frequency converter of DDPMG is proposed to augment the low voltage ride through (LVRT) requirement as well as to minimize voltage fluctuation in [44].

Simulation results clearly show that the proposed topology is a cost effective solution and simplified system design to minimize voltage fluctuation of both fixed and variable speed WTGs as well as to improve the transient stability of the wind farm.

In this approach, the OLTC, the outputs of the reactive compensation devices and the DGs are adjusted according to the network state to prevent voltage limit violations, minimize voltage deviations, and maximize the DG active power outputs in the distribution network with various loads and feeders.

Series resistance (Rs) was compensated (75∼80%) to minimize voltage errors, and cells with a uncompensated series resistance (Rs) above 10 MΩ were omitted.

Series resistance was <5 MΩ and was compensated (by 70 80%) to minimize voltage errors.

Voltage clamp was accomplished using low resistance-electrodes (∼2 MΩ) with leak subtraction (P/4) and series resistance compensation applied routinely, the latter to values >85%, to minimize voltage-clamp errors using an Axopatch 200B patch-clamp amplifier (Axon Instruments Inc., Union City CA).

We show a significant increase in the cell's usable energy density by minimizing voltage losses and maximizing the utilization of active materials in a large cell.

The following algorithm's objective is to define a set of strongly coupled busses, B, while minimizing voltage estimation errors at the controlled bus, (bin B), of a local controller.

One way to achieve this could be designing protocols minimizing voltage and pulse number while maximizing pulse lengths as far as possible.

One way to achieve this could be by minimizing voltages and pulse number while maximizing pulse lengths as far as possible.