Sentence examples for minimize the layers from inspiring English sources

Why don't we use e-procurement so we can minimize the layers of hand off and the number of people involved?" To get back on track in its next fiscal year, the company will probably announce a reorganization within the next few months.

As I ate, I understood that Hanjan's chef, Hooni Kim, had accomplished the most delicious kind of engineering feat, minimizing the layer of rice starch that makes up the bulk of a traditional pajeon and maximizing not just the crisp fried bits but also the flavor of scallions and wonderfully fresh squid.

Therefore, the proposed hybrid frequency allocation scheme can effectively minimize the cross layer interference in hierarchical networks.

In [22], VoIP packets are aggregated to minimize the MAC layer overhead of the system while still meeting the delay requirements.

The geometry of the g-C3N4 monolayer was first optimized to obtain the lattice constants with a vacuum space of 12 Å used to minimize the inter-layer interaction.

In order to equalize the diffusion rate of chemical species and chemical reaction rate for the transport of carbonate ions from the source to the receiving phase, the stirring of bulk source and receiving phases are essential to minimize the diffusion layer in between the interfaces for the chemical species in bulk solution and also solution in the fibers.

The feed solution was circulated at a flow rate of 1.2 L/min to minimize the boundary layer thickness and maximize mass transfer.

Minimum build time is then realized through optimization of the thickness and position of each layer with respect to the design and final polished part geometry in order to minimize the number of layers to be used.

To simplify the model of the piezoelectric stack and minimize the cost, two layers of PMN-29PT and one thin copper electrode were glued together using silver conductive adhesive instead of a real piezoelectric stack with 40 PMN-29PT layers.

Case studies have been performed and the results have validated that the presented method is able to minimize the number of layers for constructing an LM part while controlling the maximum error for tolerance conformance.

In addition, a diffusion barrier layer (Ti or Ni) is applied to prevent or minimize the Au upper layer from diffusing downward.