Sentence examples for minimize penetration of from inspiring English sources

Highly expressed under optimal environmental conditions, their level of expression is adjusted when it is necessary to minimize penetration of noxious compounds or maximize access to nutrients [7], [10], [11].

They found that the combination of steel fibers and shear reinforcement depicted slow and controlled cracking and better distribution of tensile cracks, and minimized the penetration of shear cracks into the compression zone.

Second, the zeolite Y layer had a smaller interparticle pore size than the PES substrate and then minimized the penetration of polymer solution into the pores, which reduced the mass transfer resistance of CO2 molecules through the membrane.

This unconstrained optimization problem was solved using genetic algorithm, particle swarm optimization, and desirability function approach in order to maximize weld penetration and minimize standard deviation of penetration.

Anticipated advantages of the CAP over an amine-based process include: Lower energy for regeneration Regeneration at pressure Ability to offset LP steam consumption with reject heat (Not tested at We Energies) Cooling to minimize ammonia penetration from the absorber.

Despite measurement conditions designed to minimize the depth of penetration of the electron beam and the resultant x-ray generation volume, we cannot entirely rule out the influence of substrate minerals in the analysis.

A three layer structure with base, support cantilever, and needle tip was designed to ensure convenient handling of sensors and minimize the invasive penetration into biological cells.

We have also developed surgical implantation techniques aimed at minimizing brain tissue damage and facilitating penetration of the cortical surface.

The importance of optimizing exposure time to CPA in order to allow adequate penetration of CPA, whilst minimizing CPA toxicity, was clearly illustrated in this study by the difference in ovarian function observed between ovaries infused with CPA for either 10 or 60 min prior to WOCP.

Product manufacturers could attempt to minimize such UV penetration to the inner wall of their products.

These preparations, based on poly acrylic acid) as a gelator, minimize the negative effects related to the penetration of liquid, but some residues can remain on the surface after the cleaning process [17].