Sentence examples for minimal voltage from inspiring English sources

The measurement initializes from 10 V because this is the minimal voltage necessary to start the motion of the pump.

A suitable value of porosity is crucial to discharge the battery at large current densities with minimal voltage losses and long durability.

The critical set voltage (V C ) of RRAM device, which is the minimal voltage for a filament path formation irrelative to time, can be obtained from various triangular rising time shown in Figure 2 through a specific designed circuit measurement by a pulse generator and an oscilloscope.

Very high polarization sensitivity up to 18 (ratio of maximal to minimal voltage responses to several directions of electric vector of light) was found in UV-responsive cells lacking sensitivity to green light.

The exponential circuits are designed for implementing in 0.18 µm CMOS technology, having a low-voltage operation (a minimal supply voltage of 1 V).

As a result of the particular architecture proposed for the realization of the function synthesizer structure, it presents a low-voltage operation (a minimal supply voltage of IV for an implementation in the mentioned technology).

The exponential circuits are designed for implementing in 0.18 µm CMOS technology and they present a low-voltage low-power operation – the minimal supply voltage is about 0.7 V, while the power consumption is smaller than 2 μW.

Accordingly, the DVR output active power is also limited by the capacity of dc capacitor and the minimal dc voltage, which is sufficient for a proper restoration of the load voltage.

The difference between the "regular" and "paused -type curves shows minimal drain voltage depaused -typeth a maximum curvest difference of approximately 0.75% at VG = 20 V and VD = 20 V.

In this context, a tradeoff between power supply rejection ratio and minimal supply voltage has to be considered.

As pointed out above, there is a minimal required voltage level for each frequency, which we also have to adjust in order to avoid chip failures (cf. Fig. 2).