Sentence examples for min were obtained from inspiring English sources
Optimal sample volume of 10 mL and extraction time of 140 min were obtained with a response surface design.
As an optimized result, the asymmetric ratio 1.13 and the annealing heat treatment time 13.5 min were obtained.
D55°C-values of 34.2 and 15.3 min were obtained for 0 and 7% beers, respectively, indicating lower thermal resistance in the more alcoholic beer.
The optimal conditions of 0.9 10 of mass ratio, the roasting temperature of 450 °C, the roasting time of 30 min were obtained.
The lower limit of detection was 30 pM Substance P (SP, 2 pg/50 µl), and reproducible responses to repeated injections every 3 min were obtained at 1 nM SP. This biosensor was designed for ~50 cells for statistical reasons, but at a lower limit of 1 receptor- and 1 reference-cell, specific ligand detection is still feasible.
Therefore, LDI mass spectra of the samples exposed to UV irradiation for different time intervals (from 0 to 120 min) were obtained and analyzed.
A syngas production rate of ∼79 mincm2 min was obtained.
The shortest running time (150 min) was obtained with LightCycler 480 II.
Furthermore, an optimized immobilization time of 30 min was obtained at a constant bias that exhibits the highest immobilization efficiency.
The shortest reactor fill time (15 min) was obtained for a cooling design configuration consisting of twelve inner cooling tubes and an external cooling jacket.
The decay rate using the on off cycle test is 0.113 mA/(cm2 min) whereas a slightly slower decay rate of 0.096 mA/(cm2 min) is obtained for the load cycle test.
