After each set of four laps, a break of approximately 5 min was introduced to enable the participant to recover sufficiently.
Therefore, in order to control for possible effects of perceived exertion, after each set of four laps, a break of approximately 5 min was introduced.
For clarifying this condition, Δ I D min min and Δ V gmin min are introduced as the representatives of the source-drain current at voltage of Vgmin = -0.5v and the gate-voltage changes during hybridization events, respectively.
Afterward, an interruption for 10 min was introduced under high-arsenic atmosphere (V/III = 18) to crystallize the gallium droplets (GDs) on the tip and induce the lateral growth of the nanowire [11].
A delay of 47 min was introduced in the ACE data to align the sharp increase in the ACE B Z with a similar increase in the GEOTAIL B Z at approximately 08 45 UT.
After the last feeding to the proboscis, a resting period of 90 min was introduced before performing CS and US tests.
Immediately after amplification, a re-annealing cycle consisting of 95°C for 1 min and a rapid cooling to 70°C for 1 min was introduced in order to prepare the melting curve acquisition step.
Immediately after amplification, a re-annealing cycle consisting of 95°C for 1 min and a rapid cooling to 65°C for 1 min was introduced to prepare the melting curve acquisition step.
The procedure of this task is exactly the same as in task (iii), only that between training and test, an additional retention period of 30 min is introduced (see sketches in Figures 1 and 6).
Mining was introduced to the area decades ago.
