Sentence examples for min up to from inspiring English sources

Heat treatments were performed for 1 min up to 1 h at 1100 °C under argon.

The compressive strength increases with delayed addition time at 7.5 min up to 90 days.

Final setting time of developed binders varied from 5 min up to more than 20 min.

The results indicate that, the compressive strength and bulk density of cement paste increase with DAT at 7.5 min up to 90 days in tap water.

The ultrahigh strength remained upon annealing for 30 min up to a temperature of 423 K but dramatically decreased with further increasing temperature.

The minimum measuring times for calibration of the flight-version detector, was between 2 and 10 min (up to 6.2 MeV) and 20 30 min (up to 8 MeV), when the detector was placed at a distance 2 5 m from the station.

Chromatographic conditions: 40°C for 5 min, 10°C/min up to 300°C, 300°C for 10 min.

The chromatographic conditions were as follows: 40°C isothermal for 5 min, 15°C/min up to 300°C and isothermal for 25 min.

The temperature gradient for pyruvate analysis was as follows: 70°C for 1 min, 1°C/min up to 75°C, 5°C/min up to 315°C, 25°C/min up to 340°C, 340°C for 5 min; inlet temperature: 70°C and heating with 360°C/min up to 360°C; interface temperature 320°C; quadrupole temperature 280°C.

The following temperature gradient was applied for lactate and amino acid analysis: 135°C for 7 min, 10°C/min up to 162°C, 7°C/min up to 170°C, 10°C/min up to 325°C, 325°C for 2.5 min; inlet temperature: 140°C and heating with 720°C/min up to 320°C; interface temperature 320°C; quadrupole temperature 150°C.

Chromatographic conditions: initial temperature 80°C, 2 min isothermal, 10°C/min up to 200°C, 4 min isothermal, 6°C/min up to 280°C, 40 minutes isothermal.