Sentence examples for min rate of from inspiring English sources

Temperature program consisted of ramping phases: 120 to 170 °C for 11.7 min (rate of 6.5 °C/min) followed by a second ramping from 170 to 250 °C for 29.09 min (rate of 2.75 °C/min) and a 9-min holding time at 250 °C.

We inferred the irregularity indices from GPS phase fluctuation by computing the median of 1-min rate of change of total electron content (fp) along the ray paths from all satellites observed.

The instrument was set to the following conditions: pressure of 62.6 kPa, purge flow of 50 ml min-1 for 2 min, flow rate of 1 ml min-1 (37 cm sec-1) and a data rate of 20 Hz.

The conditions were an overhead stirring time of 120 min, shear rate of 4000 rpm, shear time of 10 min, and the 16 cycles of high-pressure homogenizer, which produced a particle size of 82.14 nm.

The best results were obtained using a soaking period of 5 min, stirring rate of 1400 rpm and stirring time of 44 min.

For the sample treated for 10 min, the rate of carbonitriding was calculated to be ∼0.5 μm2/s.

At the first 30 min, the rate of H2O2 decomposition was higher due to the abundance of hydroxyl radicals.

After 240 min, the rate of removal of pharmaceuticals is constant indicate the equilibrium and the non-availability of sorption sites.

The highest yield of formic acid of 15.6% was achieved under optimal conditions, i.e., Fe/Ni ratio of 1 1, temperature of 300 °C, reaction time of 120 min, filling rate of 35% and NaHCO3: Fe of 1 6.

Exposure to the smoke lasted 45 min (flow rate of 100 mL·min−100

Solvent mixtures of 0.1% TFA/H2O (solvent-A) and 0.1% TFA/CH3CN (solvent-B) were used as coeluents under a linear gradient of 1 100% of solvent B (over 45 min; flow rate of 0.5 ml/min).