Sentence examples for min pretreatment process from inspiring English sources

In the first stage, slow hydrolyzing hemicellulose at low temperature (90 °C), long retention time (50 185 min) pretreatment process with more concentrated acid (4.9 9.8%), released hemicellulosic sugars, which were then separated from biomass.

Response surface methodology (RS M based on central composite design was used to optimize three independent variables of the pretreatment process: processing pressure (300 700 kPa), initial moisture contents of wheat straw (10 40%) and processing time (3 62 min).

The biomass was mixed during AFEX pretreatment process for 15 min.

The biomass was mixed during EA pretreatment process for 15 min.

A temperature of 180°C and 5 min residence time was assumed in for pretreatment process.

In the turning tests, the Ti Al N coatings prepared on the highly energetic Ti ion implantation showed the best turning performance, which endured over 50 min before the tool flank wear reached the maximum value of 0.3 mm, whereas only 28 min were endured for the tools without the pretreatment process.

To produce Ni particles, NH3 gas was introduced at 873 K for 15 min. After the pretreatment processes, CNTs were grown at 1173 K for 10 min using a mixture of acetylene and ammonia flowed to the reactor chamber.

Rice straw pretreatment process was carried out through solubilization of cellulose in dilute acid for 60 min at 120 °C using 1% (wt/wt) sulphuric acid; the delignification process was completed at 120 °C for 60 min using 1 M sodium hydroxide.

Effect of four pretreatment process variables viz.

30 min pretreatment have no significant effect on the methane yield.

Studies have found that a combination of another pretreatment process with biological pretreatment process is more effective as compared to a single pretreatment process.