Sentence examples for min of desorption from inspiring English sources

This temperature effect, however, mainly occurred in the first 15 min of desorption test.

The optimal conditions for the analytical system include a 12 min purge time at a temperature of 60 °C, and 4 min of desorption time with a desorption temperature of 260 °C.

The results also show incorporating the desorption data from the time of exposure to 13 min of desorption tests is essential to typically reflect methane desorption kinetics in coal.

Variations of the amounts of extracted drug as a function of the extraction time (adsorption/desorption) are presented in Figs.  2 and 3. From Figs.  2 and 3, it is clearly seen that the highest adsorbed and desorbed amount of linezolid was obtained at 10 min of adsorption and desorption.

After the time about 180 min, the percentage of desorption Cd-loaded MBC1 and MBC2 was constant.

The optimized SPME experimental procedures for extracting 1,3-dichloro-2-propanol and 3-chloro-1,2-propandiol in aqueous solutions involved a 85 μm polyacrylate-coated fiber at pH 6, a sodium chloride concentration of 0.36 g mL−1, extraction at 50 °C for 15 min and desorption of analytes at 260 °C for 3 min.

Optimized conditions were established as follows concerning extraction time, stirring speed, aqueous medium characteristics (ionic strength and polarity) and back desorption solvent and time, respectively: 3 h (800 rpm), addition of 10% of sodium chloride, no addition of methanol as organic modifier, and 15 min ultrasonic desorption in equivolume mixtures of acetonitrile-methanol.

The SPME fiber was exposed to each sample for 10 min by manually penetrating the septum, and, finally, the fiber was inserted into the injection port of the GC for 10 min sample desorption.

Chart was limited to first 200 min (~14 min1/2) of the process due to demonstrate the initial stage of desorption in a clear manner.

After 420 min, the quantity of gas desorption stabilizes at 1.1 m3, and the velocity of desorption is zero.

The optimum condition, concluded from one at a time method was 2 mL of 0.1 mol L−1 HCl as extraction solvent and 5.0 min from desorption time.