Sentence examples for min contact time from inspiring English sources

The optimum conditions obtained were 24.6 cm3 resin dosage, 6.00 min contact time, and 147.0 rpm shaking speed.

Same effect was observed on listerial biofilms at 65 ppm or higher concentrations, after 10 min contact time.

Optimization of the extraction experiments confirmed the maximum adsorption upon using 0.025 g biocomposite dosage and 30 min contact time.

Optimum operational conditions were established as 30.9 cm3 anionic dosage, 90 min contact time, 150 rpm shaking speed, and pH 3.1.

In the batch-scale experiment, 2.5 mg L− 1 PAA removed approximately 4 log unit of E. coli and Enterococcus from CSO with a 360 min contact time.

The optimum parameters for CPX adsorption were found out to be 306.9 min contact time, 0.40 g L− 1 adsorbent dosage, 314.8 mg L− 1 CPX concentration, pH 7.92 and the predicted adsorption uptake was 454.68 mg g− 1.

All other operational parameters were studied at 60-min contact time.

Ilhan et al. (2008) indicated the maximum removal of COD 56 and 35 % on the EC of leachate using Al and Fe electrode, respectively, in 30-min contact time.

Protein A resin is typically sanitised with 3 CV of NaOH at 0.1 to 1 M, with a 30-min contact time [ 16], corresponding to 20 sanitation cycles.

EEA1-FLAG in a buffer containing 10 mM sodium acetate (pH 4.5) was injected at a flow rate of 10 μL/min with 2-min contact time, resulting in the immobilization of EEA1-FLAG at a level of ~2,000 RU.

The adsorption kinetics results showed that the optimum fluoride (F−) uptake was achieved within the 30 min' contact time.