Sentence examples for min by applying from inspiring English sources

V. alginolyticus cells in sterile seawater were completely sterilized after 10 min by applying 0.2 V vs sce.

The deposition was carried out for 10 min by applying a constant DC voltage of 100 V.

We derived the minimal scan time T min by applying a power-law fit, to reduce the impact of single COV measurements at fixed time points.

No concentration polarization occurred due to using stirrers in the cell compartments and therefore, maximum salt removal of 90% was achieved after 120 min by applying a voltage of 20 V to the cell containing feed solution of 15 wt.% MgSt agitated at 250 rpm.

The samples were collected, and the concentration of ethidium bromide in the aqueous matrices was determined after a specified period of time at 2, 5, 8, 11, 14, 17, and 20 min by applying the spectrophotometer of UV VIS (Thermo Electron Corporation, Aquamate) at 475 nm, respectively.

Series resistance (10 30 MΩ) and input resistance were monitored every 2.5 min by applying a +10 mV, 80 ms voltage pulse to −70 mV.

Under these, optimal conditions determined by this method, EO US can be applied to oxidize ibuprofen in municipal wastewater effluent (up to 90% of degradation) while using a current intensity of 4.09 A for a period of 110 min and by applying 20 W of ultrasound power.

Then the temperature of the cell was raised to 50 °C and the sample was brought into contact with pyridine vapours (3.1 mbar) for 10 min. Afterwards by applying vacuum for 30 min physisorbed and loosely bound pyridine was removed.

The values in images acquired at earlier time points (before ∼10 min) was determined by applying this first defined boundary to the site.

The DRE of 99.9% for NF3 was achieved without an additive gas at the N2 flow rate of 150 liter per minute (L/min) by applying a microwave power of 6 kW with RVR.

Optimum resolution was achieved operating at 1.0 mL/min in the first part of the chromatogram (until 45 min) and 0.5 mL/min in the second one (from 45 min to the end) and by applying programmed temperature gradient (15 °C until 30 min and progressively increasing temperature until reaching 40 °C at 45 min).