Sentence examples for min accumulation time from inspiring English sources

The optimized conditions for the determination of Cd (II) using CS-MCPE are acetate buffer of pH = 5 as accumulating solvent, 15 min accumulation time and hydrochloric acid as the stripping solvent.

The spectral resolution was set to 0.5 cm–1, and the spectra were recorded with a 5 min accumulation time.

Different parameters affecting the determination of Cd (II) were optimized and are as follows: HCl as stripping solvent, acetate buffer of pH 5 as accumulating solvent, and 15-min accumulation time.

For FDG, we followed the protocol of ADNI and J-ADNI, in which injection activity was 185 MBq, accumulation time was 30 min, and scan time was 30 min [28].

For 18F-florbetapir and 18F-flutemetamol, standard injection activity was 370 and 185 MBq, accumulation time was 50 and 90 min, and standard scan time was 20 and 30 min, respectively.

RINs were not significantly affected by milk accumulation time in macaques; there was no difference between 10 min or 4 hr of accumulation.

For 11C-PiB, we also followed the protocol of ADNI and J-ADNI, in which injection activity was 555 MBq, accumulation time was 50 min, and scan time was 20 min.

The enhancement factor was determined as ratio of the peak current recorded at different accumulation times to that recorded without a preconcentration scheme, and the maximum value of about 4 was reached for AgCNF and about 2 for AgZCNF at the accumulation time of 20 min. At longer accumulation times, no higher current response was obtained (the results are not shown here).

For further experiment, 1 ppm Cd (II) solution was used with accumulation time of 10 min.

Therefore, the optimal accumulation time of 6 min was employed in further experiments.

The optimized conditions for the formation of TmHCF NPs were 16 mM Fe CN 63− and 1.5 mM Tm3+ with an accumulation time of 20 min.