Sentence examples for milling step from inspiring English sources

In a final jet milling step the reduction of the particle size and smoothening of the microparticle surface occurred.

The concept of omitting milling step followed by direct-molding of tablets utilizing a twin-screw extruder in a melt granulation process using thermoplastic binders was explored.

It was found that the additional ball milling step increased contact area between solid electrolyte and anode active material on the basis of GITT tests using a half cell.

Greater than 99 and 95% solids were recovered at the end of first and second ball milling step respectively through gravity sedimentation, an energy efficient solid-liquid separation technique.

A final low-energy milling step was performed at 500 eV.

In particular, rice bran is a significant residue of white rice processing, being the stream of the milling step in the rice manufacturing.

Zebrafish were processed as described previously and embedded in moulds designed to simplify the trimming and milling steps for FIB/SEM (TAAB Laboratories Equipment Ltd).

γ1-Al4Cu9 is formed during the early milling steps (5.5 h), its volume fraction increasing continuously with milling time, while the equilibrium θ-Al2Cu expected for this composition is detected only for longer times (90 h).

The microstructure of powders during different ball milling steps and as-casted steels were investigated using optical microscope (OM), scanning electron microscope (SEM), X-ray diffractometer (XRD) and transmission electron microscope (TEM).

c., d. and e. Successive annular milling steps permit to obtain a very sharp tip which curvature radius does not exceed 50nm.

To avoid this, an increase in the annular milling steps has been introduced in the procedure, which also helps avoiding the effect of the drift mentioned before.