Sentence examples for milling material from inspiring English sources

Disadvantages of the ball milling process are the relatively long milling times in the case of hard drug material, the limited scaling up ability (the weight of the ball mill and the milling material limit maximum size), and potential contamination of the milling material by erosion from the milling pearls [10].

Decker et al. [ 9] reported that milling material down to 20-80 μmeshsh particle size does not affect digestibility.

The wetland soils in the CdA River Basin have elevated concentrations of As, Cd, Pb and Zn due to more than a century of mining activities in the watershed that has redistributed the mining and milling materials throughout the floodplain [39 41].

If you ever worked with mining or milling materials, fireproofing the superstructures of building or ships, maintaining railroad or automotive brakes, insulating pipes and/or ductwork, near a road paved with crushed serpentine stone, or handled the work clothes of asbestos miners or millers, you may have been exposed at work, as well.

Both the thermal conductivity and the density of the ball milled material improved with applied pressure in a uniaxial press over the range of 14 MPa–281 MPa.

While double layer capacitance of original ACC was found to be negligible, ball milled material (ACCm) displayed capacitance in the range of supercapacitors.

Special focus is put on the prevention of recrystallization of ion milled material which poses a major problem to the formation of atomically smooth ramp interfaces with desired stoichiometry.

During scale up or transfer of roller compaction process, it is critical to maintain comparable ribbon densities at each scale in order to achieve similar tensile strengths and subsequently similar particle size distribution of milled material.

An amount of 0.2 - 0.5 g dried and milled material was put into 12 mL aqua regia (9 mL HCl +3 ml HNO3) and after 15 minutes the mineralization was performed using a microwave Berghof MWS-2, set in 2 steps (at 180°C and 100°C).

John Murphy of musicOMH described the tracks as being "rather run of the mill material", but nonetheless complimented Cyrus' promotional efforts for making the record "one of the most anticipated pop albums of the year".

Membrane lipids were extracted from 1 g lyophilized and milled material in a two-phase aqueous-organic extraction, as described by Bligh and Dyer [33].