Sentence examples for mill material from inspiring English sources

John Murphy of musicOMH described the tracks as being "rather run of the mill material", but nonetheless complimented Cyrus' promotional efforts for making the record "one of the most anticipated pop albums of the year".

Disadvantages of the ball milling process are the relatively long milling times in the case of hard drug material, the limited scaling up ability (the weight of the ball mill and the milling material limit maximum size), and potential contamination of the milling material by erosion from the milling pearls [10].

Both the thermal conductivity and the density of the ball milled material improved with applied pressure in a uniaxial press over the range of 14 MPa–281 MPa.

While double layer capacitance of original ACC was found to be negligible, ball milled material (ACCm) displayed capacitance in the range of supercapacitors.

Special focus is put on the prevention of recrystallization of ion milled material which poses a major problem to the formation of atomically smooth ramp interfaces with desired stoichiometry.

During scale up or transfer of roller compaction process, it is critical to maintain comparable ribbon densities at each scale in order to achieve similar tensile strengths and subsequently similar particle size distribution of milled material.

An amount of 0.2 - 0.5 g dried and milled material was put into 12 mL aqua regia (9 mL HCl +3 ml HNO3) and after 15 minutes the mineralization was performed using a microwave Berghof MWS-2, set in 2 steps (at 180°C and 100°C).

Membrane lipids were extracted from 1 g lyophilized and milled material in a two-phase aqueous-organic extraction, as described by Bligh and Dyer [33].

Greater success was achieved with the measurement of hammer milled material, held in the steel material pocket.

Decker et al. [ 9] reported that milling material down to 20-80 μmeshsh particle size does not affect digestibility.

This phenomenon of lignin aggregation during dilute acid pretreatment has been well cited for milled material [ 48].