To eliminate the noise from sources other than the point sources (e.g., dust particles), the magnetic data from only within 0.8 mm (the distance limit parameter can be changed) of the expected center (i.e., the midpoint of the maximum and the minimum for a horizontal dipole) were used to fit the data.
The clot lysis time was defined as the time from the midpoint of the clear to maximum turbid transition, representing clot formation, to the midpoint of the maximum turbid to clear transition, representing the lysis of the clot.
Clot lysis time was defined as the time from the midpoint of the baseline to maximum turbid transition, to the final plateau phase.
The midpoint of the plots gives the maximum value of 81.79% which is obtained at 1 6 (v/v) oil:alcohol ratio and 120 min.
By virtue of CTCSI, we can therefore obtain the mean value curve from midpoints of the local maxima and minima by just one interpolation operations, which saves almost half the computational cost.
It is found that with the installation of VED at midpoint of each span, the maximum acceleration response of the bridge can be suppressed noticeably at resonant speeds.
The rate of decline over distance, denoted as x1/2, was estimated at the point where r declined to the midpoint between the maximum and minimum r, and was calculated from the regression as.
Assuming pure rotational movement about the footing midpoint, equilibrium requires the critical value of the maximum acceleration developed in the deck (α c) to depend on the ultimate moment capacity of the foundation (M u): α c = M u/ m deckh.
To equalize the numbers of deep and shallow species, I excluded species so as to maximize the difference in the depth range midpoints (i.e., the mean of the maximum and minimum recorded depths) between the deep and shallow species; for example, in a genus with two deep and five shallow species, I removed the three shallow species with the deepest range midpoints.
Three independent variables (i.e., alkali content, water cementitious ratio, ground clay brick percentage) were evaluated in three levels minimum, maximum and midpoint of the experimental domain.
Following the reasoning underlying the Support Vector Machine [9], the final threshold is selected as the midpoint of the feasible region, resulting in a maximum margin of safety before either of the classifier constraints is violated.
