Sentence examples for middle width from inspiring English sources

The effect of laser power (1.1 1.43 kW), welding speed (25 75 cm/min) and focal point position (−0.8 to −0.2 mm) on the weld-bead geometry (i.e. weld-bead area, A; upper width, Wu; lower width, Wl and middle width, Wm) and on the operating cost C was investigated using response surface methodology (RS M.

In spite of type I specimen, type III showed combined cohesive and adhesive failures so that adhesive/adherend failure distributed over the middle width of specimen and cohesive failure happened along the edges.

Similarly, crack front in mode-I showed such a behavior in adhesive joints and composite materials such as SERR had the maximum and minimum values in the middle width of adhesive layer and at edges, respectively; leaving the edges, SERR increased and approached a constant value (plateau region) and decreased while getting closer to the edges [34 36].

Take one from the top width, middle width and bottom width.

The second axis separated L. nydeggeri from the other diploid species and L. multiflorum from the other tetraploid species by the following characters: Maximum middle bract width (MMBW), Maximum outer bract width (MOBW) and Maximum inner bract width (MIBW).

The samples were taken at the middle of width of the river.

For the experiments a barn with dimensions of 4.8 m × 1.9 m was divided in two boxes via a middle corridor (width 1.60 m).

Four functional characteristics that were related to pollinia transfer and receipt were measured: the height (distance between the rostellum and the surface of the middle lobe), width (distance between the two lateral lobes of the lip at the entrance of the passage), depth (distance between the entrance and lip claw), and the distance between the stigma and surface of the lip.

Fig. 5 The geomagnetic activity variations in the trough equatorward half-width (upper panel (a)), trough poleward half-width ((middle panel (b)), and trough width (lower panel (c)) during equinox.

When the combustion chamber configuration had a middling pocket coupled with an ignition slot located at the middle of the width direction of rotor surface, the combustion rate is the highest.

(To make things clear, let us say that the middle of the width is 1 3/4 inches).