Sentence examples for middle thickness from inspiring English sources

In the experiments of Sharon and co-workers, due to the material asperity introduced at middle thickness of the sample, FWs and shear waves would emanate simultaneously from the same spot and then overlap one another.

The middle thickness of MoS2 ICG increased from 11.2 to 32.5 nm compared to MoS2 nanosheets, indicating the success of ICG conjugation.

The closed-form solution, being based on the assumption of uniform stresses in the thickness direction in the adhesive layer, is incapable of predicting such complex stresses, but nevertheless provides a reasonably close prediction of stresses along the middle-thickness section of the adhesive layer, particularly when the adhesive layer is not very thin.

Now he has thickened through the middle — muscly thickness," not the larded "thickness of some years back.

Consequently, the optimum middle shell thickness must not exceed 10 nm in order to maintain the lowest sub-band in the middle shell above the Fermi level.

Results People who were Met allele carriers showed reduced caudal middle frontal thickness in both study groups.

The commercial microfluidic chip we used here is composed of a single straight channel: the channel has a 250-µm height (z-axis), determined by the middle glass thickness; it has a length of 40 mm (y-axis) and a width of 100 µm (x-axis).

In this context, it is shown via simulation that the Ga(In)As middle-cell thickness can be reduced from 3500 to 700 nm, whilst maintaining strong photon absorption, and that this leads to a significantly improved end-of-life photocurrent in the Ga(In)As middle cell.

Here, the yolk/shell PMAA/PNIPAM microspheres were prepared under different conditions as the model drug-carriers to investigate the effects of the diameters of the cavity of the middle layers, thicknesses and crosslinking degrees of the PNIPAM shells on the temperature sensitive drug-loading and pH responsive controlled release characteristics, with doxorubicin (DOX) as a model drug.

An optimum energy configuration is obtained for InAs/InP/InAs/InP/InAs core-shell NW RTDs with core radii and surface shells >10 nm, InAs middle shell thicknesses of 5 to 10 nm, and 5 nm InP barriers.

The Vp model of Komahashi-Daini Seamount has a thick middle crust with a thickness of around 7 km and Vp of 6 6.5 km/s.