Sentence examples similar to mid thickness and from inspiring English sources
Fracture surface shows crack tunneling at specimen mid-thickness and extensive shear lips near the free surface.
Before the onset of shear lips development, tunnelling crack fronts were observed, due to the difference in closure effects at mid-thickness and near free surfaces.
The elongated nonmetallic inclusions concentrated at the mid-thickness, as revealed by the microscopic scanning, leads to delamination cracking near the mid-thickness and subsequently to the brittle failure of the joint.
The constituents of the mortar were mixed and cast in each vent to the required thickness of 25 mm with the reinforcing mesh placed at mid thickness as shown in Figs. 4a and 4b.
A simplified and efficient finite element model, which takes account of the delamination damage adjacent to the mid-thickness plane and the lower face, is developed that is computationally affordable and delivers acceptable prediction of the critical impact force, damage shape and size, by both quasi-static load and dynamic impact analyses.
Both the delamination in interfaces adjacent to the mid-thickness plane and matrix fracture on the lower face can cause the first load drop, which corresponds to the critical impact force.
The abdominal wall thickness and mid upper arm and mid thigh were examined.
CSA was calculated using the mid-thickness surface for both the left and right hemispheres and summing the values for each hemisphere (Fig. 1A).
Although no statistically significant differences could be observed between infants of smokers and those of non-smokers in skinfold thickness and mid-arm circumference, male infants had greater mid-arm circumference but smaller skinfolds than females.
Strain gauges were attached to the bottom edge and the mid-thickness of the steel plates at the middle of each shear span, as well as at the midspan in the longitudinal direction.
The mid-thickness microhardness measured across the autogenous and filler-added weld joint are shown in Fig. 7.
