Your English writing platform
Discover LudwigSuggestions(1)
Similar(60)
Then, the large slip occurred on the Futagawa fault at mid-depth for 6 10 s, and on the shallow region of the Futagawa fault for 9 12 s (Fig. 9b).
The concentration at mid-depth is about 1.8 times the background level, which may be caused by the presence of produced water, or be the result of uncertainties, since the C/C a ratio of 1.80 at mid-depth for NE50 is not significantly higher than 1.23 at SE5000 from which the background level was determined (Fig. 10).
The two tissue segments (proximal and distal left colon) were further analyzed separately for the mid depth section.
All samples selected for FIB milling/SEM imaging were located at mid-depth of layer III.
It is observed that for d/l = 0.133, shear stress (X) attains its maximum value at mid-depth, whereas for d/l = 0.5 its value is maximum at depth lower than mid-depth Open image in new window Fig. 6 Variation of "Bending stress σ x " for different depth span ratios.
Therefore, the stiffeners were formed at the mid-depth of the sections.
The mid-depth of the reservoir is 2,950 m, with the reservoir pressure of 4,800 psi.
In longitudinal direction the web was stiffened with a trapezoidal stiffener positioned at the mid web depth for two girders and in the compression zone for the other four girders.
b Correlation of a flux patch (R is the radial distance from the center of the patch) and its mid-depth root for a range of geometrical distortion ratios S o /S1/2.
The behavior of CO2 slurry mass strongly suggests that this technique offers the potential for effective transfer of released CO2 from mid-depth to the ocean floor, and the experiments provide numerical constraints on the required design goals for this.
For a general latitudinal distortion combined with the radial distortion, we calculated the correlation between a pair of CMB and mid-depth field structures for a range of S o /S1/2 (Fig. 3).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com